This hub turns one anchored item — a 925 sterling silver paperclip chain necklace with a 19–20 mm baroque pearl drop — into the checks a buyer can repeat on every order. If you are building a wholesale sterling silver necklace range, start with the plating tier, the 50-piece minimum and the pearl size window below; if you are vetting a pearl necklace supplier, the claim-by-claim sample checks and the inbound QC list show exactly what to confirm before you commit.
Every figure on this page can be checked against the sample you receive.
The necklace is built as a half-and-half: irregular blue apatite chips on one side, a gold paperclip chain on the other, joined by a central ring that carries a linked baroque pearl drop. For a wholesale programme that layout does real work — one SKU reads as two looks, and the drop is the element that carries the perceived value on a shelf.
Two build details matter before you quote. The chain is offered in four plating colours — silver, rhodium, gold and rose gold — so a single item number can sit in several colour stories without a new tooling cost. And the length is adjustable through a tail extension, which means one SKU covers a wider range of necklines than a fixed-length piece.
On a sterling silver base, the plating figure is the thickness of the metal layer sitting on top of the silver. It is the single number that separates a promotional piece from a piece sold with a finish claim — so it is also the number a buyer should be able to read straight off the quotation. The product page lists seven options, from 0.1 µm to 3 µm.
| Tier | Layer | Typical brief | Market fit | Relative cost |
|---|---|---|---|---|
| 0.1 µm | Entry | Decorative, short-season pieces where look outweighs longevity | Trend drops and fast fashion | $ |
| 0.5 µm | Light retail | Low-ticket lines with short replacement cycles | Promotional and gift retail | $ |
| 1 µm | Standard retail | Everyday fashion lines expected to hold through a selling season | Mid-tier fashion retail | $$ |
| 1.5 µm | Upper retail | Better fashion lines that name a plating spec in the buying sheet | Department store and specialty | $$ |
| 2 µm | Semi-fine | Pieces sold with a care card and a stated finish | Semi-fine and boutique | $$$ |
| 2.5 µm | Premium | Long-wear ranges where plating is printed on-pack | Premium boutique and travel retail | $$$$ |
| 3 µm | Top of range | Bridal and fine lines carrying a durability claim | Fine jewellery and bridal | $$$$$ |
Wear is affected by skin chemistry, perfume, abrasion and storage. If your market requires a stated durability claim, ask your contact for wear-test or salt-spray data at the exact tier you are buying before the number goes on packaging.
Three different statements about this necklace get read as one. Each one needs its own confirmation step, because each one ends up somewhere different — the invoice, the care card, or the customs description.
Claim 1
The title and category place the chain in the sterling silver range, and the plating colours sit on top of that silver base — a gold-plated version is still a 925 silver piece.
Confirm on sample
Check the 925 stamp on the findings and ask for the fineness to appear on your invoice. The stamp is what your retail listing will be judged against.
Claim 2
This is a finish descriptor, not a solid-gold claim. Gold appears as one of four plating colours alongside silver, rhodium and rose gold, but the specific gold plating method is not named on the page.
Confirm on sample
Match the gold tone against your approved colour chip in daylight, and ask for the plating method and the µm you are buying to be written into the quote. If your listing uses the word “gold”, make sure it reads as plating.
Claim 3
The descriptive copy says “natural turquoise chip beads”, while the specification block lists the stone as “irregular blue apatite”. Both terms appear on the same product page.
Confirm before labelling
Treat the stone name as open until you hold the sample and have a written stone name from your supplier. Labels, care cards and customs descriptions all depend on it, and a correction after printing is the expensive version.
Flag this internally before you order
The turquoise / blue apatite naming difference is unresolved on the product page. Nothing else on this page depends on it — the weight, length, minimum and plating tiers stand — but the stone name does. Ask for it in writing, in the same message as your quote request, and keep the reply with your purchase order.
Natural materials do not hold a single millimetre figure, and the page is honest about that in places and silent in others. These four points are the ones to settle on paper before a bulk run.
Pearl
The pearl is given as a 19–20 mm range, and “baroque” is a shape category rather than a tolerance. Expect variation in outline, surface and luster between pieces, and agree what an acceptable baroque look is against a physical approved sample.
Stone
The chips are described as irregular and no chip dimensions are listed. Set acceptance on visual match to the approved sample rather than on a millimetre figure, and confirm the stone name at the same time.
Weight
The page gives a per-piece weight. Use it as a receiving check, and agree the weighing tolerance and the scale with your supplier in advance so normal variation is not read as a shortage.
Length
Overall length is stated as 50 cm with a tail extension, but the extension length is not given. Measure it on the sample and write the figure into your purchase order so repeat orders match.
The page does not state clasp type, paperclip link dimensions or pearl drop length. Confirm all three on the sample before any of them appears in a listing.
Four common buying situations, and the specification path that fits each one. Every path stays inside the options the product page actually lists.
Test order
50 pcs · silver or rhodium plating · 1 µm
Keep the first run simple: a silver or rhodium finish needs no colour story, and one item at the minimum quantity limits exposure while you read sell-through.
Boutique label
2–2.5 µm · gold or rose gold
Only print a thickness on the card if your quote names the same figure and you have wear data behind it. A premium tier on a boutique price point is a defensible pairing.
Bridal capsule
3 µm · baroque pearl drop · 3.75 g/pc check
The pearl drop is the value carrier, so this is the case for the top tier. Hold the per-piece weight as your receiving standard so the calibre matches the price.
Promotional line
0.5 µm · silver plated
A shorter wear window is acceptable when the piece is not sold as fine jewellery. Keep the plating figure off the packaging so the printed claim never outruns the order.
Eight checks that cover the facts stated on the product page and the gaps it leaves open. Run them on the first carton, not the last.
This product runs on a quotation flow rather than a checkout, so nothing is priced on the page. Send the item number with your plating tier, plating colour, quantity and destination, and ask for the stone name and extension length to be confirmed in the same reply.
Keep adjacent product options together for a faster catalog comparison.
Large Silhouette, Ultra-Lightweight Wear These beads offer a bold, statement-making volume. Thanks to advanced hollow electroforming technology, each bead weighs only approx 1g-2g, allowing designers…
View product
Exquisite Main Stone Features a stunning oval-cut Morganite in a secure bezel setting, known for its romantic appeal and high clarity.
View product
Exquisite Vintage Design Features a unique hammered/textured gold hoop paired with a regal teardrop-shaped blue stone (Lapis-style) surrounded by sparkling white zircons for a timeless, "old-money"…
View productReview the product details, images, and specifications presented on the official product page.
Use the application and use-case information published on the official product page.
Confirm the specifications and options listed for the exact product variant before placing an order.
Check the official product page or ask the supplier about options shown for the selected product.
Use the official contact or inquiry path provided on the site.
Include the product page, intended use, required quantity, and any specifications you need the supplier to review.
